Ja, ich bekomme alles von paceperform, mark kennt sich bestens aus mit den alten chevys, und gibt immer eine auswahl der teile, nicht nur immer das teuerste, wirklich für mich eine gute adresse.
hier die antwort auf meine e mail:
----- Original Message -----
From: Mark Lucicosky
To: Isi Geissberger
Sent: Thursday, January 04, 2007 3:54 PM
Subject: RE: automatic transmission th 400
Hello Isidor,
I still remember you!
Does your car have the original cast iron powerglide in it or has it been changed to a newer aluminum powerglide?
If it still has the iron powerglide, you will need to put a transmission crossmember (support) in the car, modify the driveshaft length,
You will need a new output yoke,and you will need to modify your shifter linkage if car is still column shift.
You will also need a 14" flywheel because torque converter bolt patterns are different.
You will also need a downshift switch and speedometer gears.
Below are the links to the parts you will need to start with.
This is a stock TH400 -
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=167077The stock one will work fine behind your engine, but will shift soft.
This is the performance TH400-
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=175020This torque converter will work with either one -
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=27081Here is the flywheel -
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=22896Output yoke -
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=60192Kickdown switch - https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=71293
Transmission support crossmember -
https://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=126408Transmission dipstick -
https://paceperformance.com/index.asp?PageAction=VIEWCATS&Category=1850These are the main parts you will need.
If you have any questions, let me know.
Mark